Wolfcraft Multi wood jointer User Manual download pdf (Page 11)

Section

axminster.co.uk/signup for our exclusive email offersCall 03332 406406

310

SectionDowelling Jigs

Dowelling Jigs

The dowel is perhaps the simplest way of forming a joint, whether

edge, butt, lap, tee or mitre joint. All that is required is the accurate

marking and drilling of the holes to take the dowel. Jigs are

designed to make the jointing process as accurate as possible.

A simple jig and extremely easy to use, suitable for producing E, L

and T joints with either 6mm, 8mm or 10mm dowels in material

up to 30mm thick. Simply hold the jig in place and place the drill

bit in the correct sized hardened steel drill bush for an accurate

joint every time. One beneﬁ t of the Dowelmaster over other jigs is

that it automatically positions the hole in the centre of the timber.

Dowelmaster Jig £19.94 £16.62 910385

Inc.vat Ex.vat Code

Wolfcraft Dowelmaster Jig

An alloy jig with hardened steel bushes

which will produce E, L and T joints with

either 6mm, 8mm or 10mm dowels.

Somewhat different to the Dowelmaster

in that it has a clamp included which

allows the work to be accurately located

and drilled for greater degrees of accuracy.

The jig is supplied complete with two

clamps to ensure that the work cannot

move when clamped and is equally spaced-especially useful when

drilling large boards. Best used with a (lip and spur) dowel drill and

depth collar. All-round accuracy in work up to 30mm thick.

Wolfcraft Universal

Dowelling Jig

Dowelling Jig £49.94 £41.62 910384

Inc.vat Ex.vat Code

Form either E or L joints in timber up to 32mm(1.1/4”) thick.

This aluminium extrusion jig slides on steel bars and the bushes

are made from hardened steel and are replaceable. A clamp

is provided on the main part of the jig for holding the timber

during drilling and also a second clamp for securing the boards

together whilst the position of the jig is being adjusted. Holes

are drilled in both boards at the same setting so an accurate

line-up guaranteeing. This jig produces an excellent result.

Accommodates 6mm, 8mm and 10mm dowel holes. Supplied

with hardened steel bushes for 6mm, 8mm and 10mm dowels.

Axminster No.1 Dowelling Jig

No.1 Dowelling Jig £39.44 £32.87 410233

Replacement Bushes £11.34 £9.45 410234

Inc.vat Ex.vat Code

Dowel points provide a means of accurately transferring the

position of holes. The best type of drill to use is a lip and spur bit.

Also available are drill collars to accurately gauge the depth of the

drilled hole. Air dried beechwood pre-cut ﬂ uted dowels available

in 6, 8 and 10mm packs.

4 of Points 6mm £1.44 £1.20 910378

4 of Points 8mm £1.64 £1.37 910379

4 of Points 10mm £1.94 £1.62 910380

Drill & Collar 6mm £5.24 £4.37 910368

Drill & Collar 8mm £5.75 £4.79 910369

Drill & Collar 10mm £6.74 £5.62 910370

Collars 6, 8 & 10mm £2.24 £1.87 910371

6mm HSS M2 Drill Bit £5.15 £4.29 502136

8mm HSS M2 Drill Bit £7.04 £5.87 502137

10mm HSS M2 Drill Bit £9.24 £7.70 502138

Drill, Collar, Points & 26 Dowels 6mm £5.45 £4.54 910381

Drill, Collar, Points & 24 Dowels 8mm £6.24 £5.20 910382

Drill, Collar, Points & 20 Dowels 10mm £6.84 £5.70 910383

Dowel 6mm x 30mm, (Pkt 200) £6.44 £5.37 910372

Dowel 6mm x 30mm, (Pkt 1,000) £29.94 £24.95 910373

Dowel 8mm x 40mm, (Pkt 150) £6.95 £5.79 910374

Dowel 8mm x 40mm, (Pkt 900) £38.94 £32.45 910375

Dowel 10mm x 40mm, (Pkt 120) £6.95 £5.79 910376

Dowel 10mm x 40mm, (Pkt 960) £49.94 £41.62 910377

Inc.vat Ex.vat Code

Obtaining dowels to perfectly match a project or speciﬁ c species

of timber is, to say the least, almost impossible. Not so if you own

a Veritas dowel cutter and have a few timber off-cuts to hand.

These cutters can be used two ways. They can be used like a

hand-held pencil sharpener, to put accurate tenons on the tips of

turnings or on rustic furniture components. Alternatively using

a cordless drill, you need only cut square stock slightly oversize

(1.5mm is ample) and use a square socket (with a 3/8” square

drive for the 3/8” and 7/16” cutters or a 5/8” square drive for the

1/2”cutter with a 1/4” hex adaptor - available separately) to power

the stock through the dowel cutter. The carbon-steel blade in

the plated zinc alloy body is adjustable. Works equally well in

soft, green or hard woods. The curved blade is relatively easy to

sharpen when required. Imperial sizes only available 3/8”(9.5mm),

7/16”(11mm) and 1/2”(12.7mm).

Veritas Dowel Cutters

3/8” (9.5mm) £36.44 £30.37 202380

7/16” (11mm) £36.44 £30.37 202381

1/2” (12.7mm) £36.44 £30.37 202382

Inc.vat Ex.vat Code

Dowel Points & Bits

The right tool to choose if you wish to make exact sized dowels

from any solid timber. The dowel plate is a 130mm(5.1/8”) x

38mm(1.1/2”) rectangle, 6.3mm(1/4”) thick, surface ground

A-2 cryogenically treated tool steel. A very humble looking but

nonetheless a very precise tool. The holes are machined with a

6° clearance on the underside but are straight for the ﬁ rst 0.025”.

The tool can be sharpened many times without any change in

the size of the holes, but quite frankly at 60 Rockwell it is doubtful

whether it will ever need sharpening. Both metric and imperial

plates are available, to cut 3mm, 4mm, 6mm, 8mm, 10mm, 12mm

& 16mm dowels or 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2” & 5/8” in imperial

sizes. A leather wallet to protect your dowel plate is also available.

Lie-Nielsen Dowel Plates

Metric Dowel Plate £49.94 £41.62 421066

Imperial Dowel Plate £49.94 £41.62 421065

Dowel Plate Wallet £13.44 £11.20 100746

Inc.vat Ex.vat Code

High quality beech dowelling in 498mm lengths, plain or ﬂ uted.

A question often asked is why have ﬂ utes? This is to allow the

passage of air and excess glue out of the hole as you insert the

dowel to avoid compression.

3mm Plain Dowel Pkt 10 £3.44 £2.87 503042

4mm Plain Dowel Pkt 10 £3.44 £2.87 503043

5mm Plain Dowel Pkt 10 £3.95 £3.29 503044

6mm Plain Dowel Pkt 10 £4.94 £4.12 503045

8mm Plain Dowel Pkt 10 £4.94 £4.12 503046

10mm Plain Dowel Pkt 10 £6.44 £5.37 503047

12mm Plain Dowel Pkt 10 £8.45 £7.04 503048

14mm Plain Dowel Pkt 10 £10.74 £8.95 503049

16mm Plain Dowel Pkt 2 £2.94 £2.45 503050

18mm Plain Dowel Pkt 2 £4.74 £3.95 503051

20mm Plain Dowel Pkt 2 £5.24 £4.37 503052

25mm Plain Dowel Pkt 2 £7.25 £6.04 503053

6mm Fluted Dowel Pkt 10 £4.25 £3.54 503054

8mm Fluted Dowel Pkt 10 £5.24 £4.37 503055

10mm Fluted Dowel Pkt 10 £6.44 £5.37 503056

12mm Fluted Dowel Pkt 2 £1.99 £1.66 503057

14mm Fluted Dowel Pkt 2 £2.54 £2.12 503058

16mm Fluted Dowel Pkt 2 £2.94 £2.45 503059

Inc.vat Ex.vat Code

Beechwood Dowelling

498mm Lengths

Tenon Cutters

For full details please refer to the ‘Drilling Section’

08_Wood Joining 294_310.indd 310 29/11/2013 12:13

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments

Wolfcraft Multi wood jointer User Manual Page 11

Comments to this Manuals

Related products and manuals for Power tools Wolfcraft Multi wood jointer